Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Will Hydrogen Happen?

Looking at the future of hydrogen-fuelled cars

Courtesy of Ricardo

Click on pics to view larger images


Long seen as the dream fuel to power a globally sustainable transport system, hydrogen still faces formidable obstacles on many fronts. This story, sourced with permission from automotive technology development company Ricardo, shows how plug-in hybrids might be the vehicles best placed to use hydrogen.

Less than a decade ago there was little or no public awareness of the negative environmental effects of carbon emissions or the need to reduce the use of – and ultimately move away from – fossil fuels.

Today, however, it’s the issue that’s on everyone’s lips: the debate is no longer confined to the environmental movement but has become a public talking point. This means that the pressure is on for policy makers to begin delivering more focused proposals for providing sustainable energy, not just for road transport but for the supply of domestic and industrial energy as well. And inevitably in any debate about energy, that dream zero-carbon fuel – hydrogen – is the central focus.

Click for larger image

Hydrogen is still very much on the agenda as an energy carrier, along with electricity. But, says Ricardo project director for research and collaboration Nick Owen, the time has finally come to recognise just how great some of the challenges to its widespread use really are.

This view is informed not least by his role over the past three years as program manager of the European Roads2HyCom project, a partnership of 29 organisations led by Ricardo, that has studied technical and socio-economic issues associated with fuel cell and hydrogen technology across Europe. The most likely use of hydrogen is still in conjunction with fuel cells, he says, though fuel cells can also run via reformer technology on a number of different fuels, including gasoline.

“Our view is that the fuel cell is a promising but challenging technology that certainly has a future, and probably in road transport too,” says Owen.

Yet he points out that a lot of commonly held beliefs are now in question.

“Although there has been a lot of progress in areas such as low-temperature operation, durability and cost, the industry is nowhere near ready to hit the go button when it comes to the profitable commercialisation of fuel cells for cars.”

Steady-State Supply

Historically, fuel cells have always been good at delivering a steady supply of power and have undergone considerable development to allow them to emulate the transient capability required of a car engine. Today, thinks Owen, economic factors make fuel cells suitable for stationary applications: a fuel cell in a combined heat and power system tends to operate at constant power, whereas in a car it spends most of its life switched off or operated at part load.

Click for larger image

“Trying to replace a low-cost vehicle powerplant with something more efficient but more expensive, like a fuel cell, makes little economic sense when that vehicle spends most of its time shut down in a domestic garage or in the car-park at work.”

It is hardly surprising, then, that despite the best efforts of the automobile industry, it is the developers of stationary fuel cell systems who are now beginning to fulfil their commercial goals. Ricardo is aware that three fuel cell integrators have announced forward orders for tens of thousands of fuel cell systems in the stationary sector. Two of those are working in the domestic heat and power sector and the third is in telecoms. Together, they have orders for around 100,000 stationary fuel cell systems which should be delivered in the next four years or so.

Cost per kilowatt is still one of the major barriers facing fuel cell producers, and this is a particular challenge in road transport applications. A domestic stationary fuel cell system typically produces heat and power for at least 50 per cent of the time, day and night.

Not only is a fuel cell in a car doing nothing for most of the time, but while it is running its average output is likely to be 10 kW or 20 kW and not the 80 kW maximum it needs to be capable of. This applies even in a hybridised application in which energy buffering can be used to manage and smooth out demand.

Economies of Scale

The other major factor which automotive fuel cell developers are conjuring with is economy of scale.

“At least 10 per cent of cars across the EU would need to be powered by fuel cells before economies of scale bring the cost down enough,” Owen calculates.

“That’s 1.5 million fuel cell vehicles before they become profitable for the manufacturer and affordable for the user. It’s an enormous leap and a much greater volume step than the type of demonstration projects seen today – typically large city transport authorities buying or leasing limited fleets of fuel cell buses.”

Even after a decade on the market, hybrids still have not achieved this level of sales and the current players, says Owen, are “playing a long game”. With hybrids there are fewer technical issues than with fuel cells, which will also need a completely new fuel delivery infrastructure.

Click for larger image

“The frustrating thing is that if we could jump to the point where there are a larger number of these vehicles, while at the same time solving some of the technical hurdles, you could produce something that’s commercially successful. But for now, whoever does it first is going to have to sell at a loss for quite some time and it is likely to require a lot of government support in the form of subsidies.”

In addition to the technical issues and logistics of its delivery and storage, fuel purity is also a major issue.

The tank: a major hurdle

But perhaps the biggest technical hurdle is still the cost-effective production of hydrogen fuel tanks. Fuel cell stacks are beginning to mature. A passenger car with a life of 200,000 km needs a fuel cell life of 5000 hours, and manufacturers are now starting to achieve this. A combined heat and power stationary fuel cell with a life of 10 years would need a fuel cell life of 90,000 hours. Again, manufacturers expect to realise these targets during the next couple of years.

The story is similar with regard to cost. Two major fuel cell developers say they could manufacture a high volume PEM fuel cell stack (ie not the complete system) for transportation use for $50 per kilowatt. In the stationary sector, the cost of the next generation of systems has been brought down to around $2000 per kilowatt installed. At these levels, both would be commercially viable.

However, while the fuel cell is a glamorous component that tends to get all the attention, there are more potential suppliers who believe they know how to make a cheap fuel cell than there are those who know how to make a cheap hydrogen tank.

“Hydrogen is an inconveniently small molecule with some really quite nasty escape habits,” continues Owen.

“Whether you’re talking about liquid or compressed hydrogen, or even some of the more exotic absorption techniques, they all face limits and barriers that are defined by the laws of physics.”

As a result, Ricardo believes that the fuel tank of hydrogen powered vehicles will be a highly expensive component compared to today’s products. A typical gasoline tank with all its associated components currently costs around $150, whereas a comparable hydrogen tank, even made in high volumes, could cost $10,000 or more.

Click for larger image

Composite hydrogen tanks usually comprise an impermeable core wrapped in carbon fibre using a process that takes days not hours; the tanks also need to have some 200 sensors integrated into them to warn of impending failure. The tanks are predominantly hand-built from one of the world’s most expensive materials, and finding a way to significantly reduce the cost has so far eluded manufacturers.

A further problem is that even at $10,000 the tank still won’t buy you a substantial driving range – and beyond the current maximum level of 700 bar the advantage diminish as the cost and weight rocket. Some developers have even been reported as considering a reversion to 350 bar technology.

An alternative approach is likely to be in optimising other aspects of the car’s design – such as reducing weight - to improve the range. But in an area where increased value is placed on energy efficiency, such efforts are likely to be necessary even with vehicles powered by conventional fuels and conventional liquid fuel tanks.

Supply Chain

One less obvious factor in the hydrogen debate is how best to deliver it to the point of sale, says Owen.

“The most efficient way to transport hydrogen is in a pipeline. Failing that, liquid is by far the most effective method of bulk transportation. But then you’re faced with making the hydrogen, liquefying it (which uses 30 per cent of the energy contained within it) and then compressing it. There are ways of doing that, but they are not necessarily practical in a neighbourhood filling station.”

The question of sourcing hydrogen is complicated but considerable amounts are already used in industrial processes such as fertiliser production and the refining of metals, plastics and petrochemicals.

“If you could somehow divert and purify all of that hydrogen,” continues Owen, “it would be sufficient to fuel a third of all European vehicles – though then you would have no fertilisers, plastics or metals.”

More to the point, the existing surplus production of hydrogen, based on fossil fuel, could support the early stages of a hydrogen transport system.

“The point here is that hydrogen is not a rare gas that can be only bought in a sample bottle. Industrial quantities are already quite large and most is steam reformed from natural gas.”

But the supply of hydrogen fuel would need to migrate to low carbon, renewable sources for its use to make sense in the long term.

The Roads2HyCom project concluded that by 2020 the development of renewables will not provide a sufficient surplus beyond the extra already required for the greening of the existing electrical grid power infrastructure. Clearly, natural gas is not a sustainable fuel source: the well-to-wheel greenhouse gas emissions (running on natural gas) can even be slightly inferior to those of an advanced fossil-fuel hybrid vehicle.

In the long term, the aim would be to manufacture the hydrogen by sustainable means, and in Europe this would need to integrate with broader EU energy policies.

“In that case, there is a strong argument for using sustainable fuel for reducing the carbon footprint of the electricity grid by feeding the energy into it, rather than using it to power vehicles,” explains Owen. “Almost without exception, if more renewables become available, or more nuclear or carbon-capture coal plant capacity comes on stream, that would be the best course of action.”

Clean coal

Carbon-captured coal is a slight exception, Owen continues. During the carbon capture process, hydrogen liberated when the CO2 is extracted from the coal is used to drive the power station. However, it may well be possible that there would be sufficient surplus heat in such power stations to export some of the hydrogen for use in vehicle fleets, so that the competition between power generation and use as vehicle fuel is reduced. The surplus can be substantial. A power station producing 400 MW of electricity can produce enough surplus hydrogen to power 1000 fuel cell buses or 25,000 cars.

Generally, though, there will always be competition with the energy grid for a supply of primary energy. In order to make those resources available for hydrogen production, there will either need to be a policy shift which recognises the secure supply of coal within Europe, or a surplus.

Click for larger image

“The most likely areas of power generation where that’s likely to occur in the next 20 years will be wind energy, solar energy and wave energy, all of which are somewhat intermittent. There can also be buffering problems, especially in a weak grid, where the surplus cannot be stored. Then it makes sense to consider diverting that surplus energy into making hydrogen; otherwise it would be lost. Hydrogen may be difficult to store, but it’s not as difficult as electricity.”

It follows, then, that for hydrogen supplies to have genuinely green credentials and for there to be sufficient quantities, the ramp-up of this infrastructure will need some ambitious energy policies making clean energy sources generally available. If the two are not closely coordinated, the situation may well arise where there is insufficient energy available for it to make environmental sense to use it in the manufacture of hydrogen.

The plug-in hybrid: key to hydrogen?

It is now clearer than ever before that the initial excitement over fuel cell vehicles and their early deployment in the late 1990s was misplaced, says Owen.

“In 2008 it became fashionable to talk about electric vehicles again, but such vehicles also face severe challenges. Many people still believe there must be one golden bullet out there that solves all the environmental problems. The public has believed in the past that hydrogen and fuel cells were that golden bullet; then it was biofuels and now it seems to be the electric vehicle. I think answer is that it’s all of them.”

Owen believes that with the anticipated progress on nano technologies, the electric car will eventually flourish as an alternative to combustion-engined vehicles.

“We will develop better batteries that will make electric cars attractive to a broader part of the market. Electricity does have an advantage in that the energy chain is more efficient, especially since the infrastructure already exists and most renewables are easily made into electricity at the point of harvest.”

The existence of that infrastructure may have been overlooked in the rush to develop bold new alternatives, he notes.

Transmitting that electricity, charging a battery with it, and then discharging it through a motor is highly efficient compared to making hydrogen from a primary energy source, then putting it into a fuel cell and turning it back into electricity, he explains.

“So an EV [electric vehicle] , well-to-wheels, could have about half the carbon footprint of a fuel cell vehicle. But range remains an issue.

“If we are to build a longer term future without fossil fuels, what is the solution? Second generation bio-fuels are promising, but there are limits as to how much can be made – which brings us back to hydrogen. My view is that is we do see hydrogen fuel cell cars, they will be plug-in hybrids.”

Economic Balance

Using a traction battery in conjunction with a fuel cell powertrain, rather than relying completely on the fuel cell to deliver power to the motor, means that the fuel cell can be less sophisticated and thus cheaper to manufacture. The battery can also be smaller and cheaper than that of a pure EV.

Click for larger image

This approach may be perceived as something of a U-turn in view of the fact that fuel cell developers were once obsessed with developing stacks that could emulate the transient response of an internal combustion engine, rather than relying on heavy and expensive battery packs to support them. But with a clear trend towards increasing hybridisation and better and cheaper battery technology, fuel cells are clearly not the only game in town.

Hydrogen is a promising solution for the future but it will be only one of a number of solutions, Owen concludes.

“I think it’s unlikely we will ever see a world that is only populated by hydrogen fuel cell vehicles. It’s a fundamental law of nature that when resources get scarce, you have to diversify. That law applies to road transport every bit as much as it does to plant and animal species on a desert island.

“Quite clearly we will see fuel cells becoming commercially successful in stationary applications in the next decade. As for cars, it could be a plug-in hybrid that finally makes hydrogen happen.”

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
A bloody nightmare...

DIY Tech Features - 6 March, 2012

A New Home Workshop, Part 5

Measuring ride quality

Technical Features - 4 May, 2010

Ride Quality, Part 2

Why two PC fans are unlikely to improve your engine's performance...

Technical Features - 6 July, 1999

The Twin Turbo Zet

Intercepting analog and digital signals

DIY Tech Features - 3 March, 2009

How to Electronically Modify Your Car, Part 12

The $10 lathe or drill press tachometer

DIY Tech Features - 11 August, 2009

A Drill Press or Lathe Tacho

Japan's first supercar

Special Features - 8 February, 2008

Toyota 2000GT

An extraordinary place from an extraordinary time

Special Features - 26 November, 2013

York Cold War Bunker

Using a prebuilt DIY electronic module to flash high intensity LEDs

DIY Tech Features - 14 July, 2008

Bike LED Lighting Power!

The beautiful 1950s Mercedes 300SL

Special Features - 27 February, 2008

The Gull-Wind Marvel

One of the most amazing constructions ever

Special Features - 23 February, 2010

Building the Eiffel Tower

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip