Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Afterburner Beetle!

Uh-oh - this Volksie Beetle packs an amazing 1350hp (1007kW) of jet turbine thrust!

Words by Michael Knowling, Pix courtesy Ron Patrick

Click on pics to view larger images

At a glance...

  • World's most extreme Beetle
  • 1350hp (1007kW) GE jet engine
  • Beautifully engineered
  • Road driven in California!
Email a friend     Print article

You’ve probably heard those insane stories of people strapping a jet engine to their ride. Well, now it’s a reality – a jet-powered vehicle has recently been registered in California. And, even more bizarre, it’s a Beetle!

Its Top Gun meets a new age Herbie.

Owned by Ron Patrick, this 1350hp (1007kW) jet ‘assisted’ Beetle sets the standard for modified cars. Ron started with the goal of creating the wildest street-legal car possible – something that stretched the limits of acceptance. Reckon he’s achieved it?!

Click for larger image

So why chose a Beetle as a platform? Well, one of the main reasons is the Beetle ‘wears it well’ – the rear glass area provides excellent through-vision to the jet and, of course, it’s the last thing you expect to see poking out the back...

Click for larger image

While most people spend the first few days gazing admiringly their brand new car, Ron shocked the neighbours by cutting a gaping hole in the back to make a home for the jet engine. A pneumatic saw and jeweler files have achieved the desired chip-free result – but it wasn’t easy cutting through the layers of metal and bumper material. The irregular shapes in the back of the Beetle also made if difficult to ‘map out’ the cut.

Click for larger image

So now there was enough space to fit the jet – how on earth do you mount it to the vehicle? Ron designed a strong, damage-tolerant and lightweight frame using finite element analysis. Interestingly, the jet engine expands massively as it gets hot and, as a result, some pretty special mounts were necessary. The front mounts are made from rubber and the back of the jet is suspended on a combination of sliding mounts and rubber. Thrust from the jet is transferred to the body via an intricate arrangement of sandwich plates and contoured aluminium billets which are slid into the frame rails. A heat blanket prevents the rear bumper from melting when the jet is running...

Click for larger image

Propulsion comes from a GE Model T58 which was originally designed for a turboshaft helicopter. However, with some internal mods and a custom tailpipe, Ron has converted it into a pure jet engine which spins up to 26,000 rpm. Output is rated at 1350hp (1007kW) and it consumes a whopping 11,000 cfm of intake air. Intake air for the jet is supplied through the wound down windows and open sunroof - it gets a bit windy inside...

Click for larger image

Nestled in the rear alongside the jet is a 19 litre dry sump system, a 53 litre Kevlar kerosene tank, a Halon fire system, a custom screen to prevent the jet inhaling foreign objects, a dedicated battery, fuse and relay panel. Interestingly, the jet uses a 24V starter motor that draws 700 amps for 20 seconds during start up – that’s a lot of grunt! Oh, and up to 57 litres of kerosene can be consumed in one minute when ‘goofing around’.

Click for larger image

Up front, Ron has something beyond a typical AutoMeter gauge stuck on the A-pillar. Check out the trick looking billet aluminium gauge panel which surrounds the factory gauge pod. There are three gauges for the jet – rpm (as a percentage), oil pressure and turbine inlet temperature - Ron warns that exceeding 650 degrees Celsius for extended periods will result in serious damage. Switch labels are milled into the front face of the aluminium panel - in matching VW font, of course... A throttle lever for the jet is mounted alongside the Beetle’s transmission lever. And, yes, the factory flower vase remains - though flowers would likely get sucked out when the big jet is spinning!

So how can this thing be driven on the road? you ask.

Click for larger image

Well, we’re told that the California DMV (Department of Motor Vehicles), ARB (Air Resources Board) and CHP (California Highway Patrol) have been meeting to try to find a way to get Ron’s Beetle off the road. At present, it appears there’s nothing substantial for Ron to get nabbed on. In normal driving, the car is powered by the standard Beetle engine delivering drive to the front wheels - it’s only when Ron ‘wants to have some fun’ he’ll wind up the big GE and ignite the afterburner. Think of it as a hybrid vehicle...

Click for larger image

How fast is it? Nobody knows for sure – as Ron says, "the car was built to thrill me, not kill me..." Anyone brave/stupid enough to find out?!

Click for larger image

And we’ll tease you with this – Ron’s next project. You’re looking at a humble Honda Metropolitan scooter which is being prepared for fitment of twin JFS 100 jets – just one of these jets will propel a cart to around 100 km/h... Yee-haw!

See more of the jet Beetle and the happenings in Ron’s garage at www.ronpatrickstuff.com/

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
The steering

DIY Tech Features - 2 June, 2009

Chalky, Part 4

Less than $5 and yet can make a real driving improvement

DIY Tech Features - 13 January, 2009

How to Electronically Modify Your Car, Part 5

Getting planning approval

DIY Tech Features - 7 February, 2012

A New Home Workshop, Part 3

You don't need an expensive factory towbar harness - even on CAN bus cars.

DIY Tech Features - 4 August, 2009

Towbar Electronics

Describing how diesel burns

Technical Features - 16 April, 2013

Diesel cetane ratings

How variable compression engine technology works

Columns - 4 April, 2008

Changing the Squeeze

Do it yourself development of an aero undertray

DIY Tech Features - 3 June, 2004

Undertrays, Spoilers & Bonnet Vents, Part 2

Engines that don't need cams, rocker gear or cam belts!

Technical Features - 17 April, 2001

Camless engines

Building an adjustable temperature alarm - and more!

DIY Tech Features - 27 October, 2009

eLabtronics EZ System, Part 4

Tuning the system

DIY Tech Features - 8 January, 2013

Sound in the Lounge, Part 4

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip