Magazines:  Real Estate Shopping: Adult Costumes  |  Kids Costumes  |  Car Books  |  Guitars |  Electronics
This Issue Archived Articles Blog About Us Contact Us

Big Bad Boss

This Ford BA XR8 will knock the wind out of you with its 500-odd horsepower at the wheels

Words by Michael Knowling, Pix by Julian Edgar

Click on pics to view larger images

At a glance...

  • High-strength engine rebuild
  • Vortech supercharger
  • Elaborate twin 3 1/2 inch exhaust
  • Around 500hp at the wheels - with excellent drivability
Email a friend     Print article

Wayne Urbaniak’s modified Ford BA XR8 represents the fresh face of V8 performance in Australia. Not so long ago, a 500hp-at-the-wheels V8 meant putting up with a short revving truck engine with driveability, fuel consumption and emissions to make you cringe.

Well forget all that. This BA XR8 packs a mildly rebuilt engine with a bolt-on supercharger kit to achieve bulk horsepower together with all the sophistication you expect in the 21st century.

Wayne purchased his XR8 second-hand with just 2000km on the odometer. And the reason for choosing a Ford V8 over the rival Holden product? Reliability. Wayne had heard enough stories about oil-related problems in LS1s to make a lasting impression.

Click for larger image

Not long after purchase, Wayne treated the Boss 260 engine to an off-the-shelf Centrifugal Air Pumps Australia (CAPA) Vortech Stage 2 supercharger kit. This gave plenty of grunt but, back when not many people knew much about the Boss 260 engine, it wasn't realised that the stock conrods are pretty marginal in strength. Wayne soon had an engine with three stretched and four bent rods...

Click for larger image

At this point, Wayne enlisted Bryant Engineering to rebuild the engine using high-strength titanium conrods, lower compression forged pistons and the standard heads and cams. It’s nothing wild but it enables more juice to be squeezed from the supercharger set-up.

With his freshly rebuilt motor, Wayne fitted a custom supercharger and idler pulley to increase boost pressure. At elevated boost pressure we’re told that the existing intercooler caused up to 6 psi pressure drop at full power so a high-flow replacement unit was fabricated. This slashes restriction to just 2.5 psi.

Click for larger image

The new intercooler is installed with custom high-flow plumbing (which incorporates a Bosch recirculating blow-off valve) and a custom water injection system comprising a brass spray nozzle near the supercharger compressor outlet. The water spray provides extra insurance that the engine doesn’t detonate on variable fuel brews.

Exhaust backpressure is next to zero thanks to an elaborate twin 3 ½ inch system. Wayne says there are 28 mandrel bends used in each side of the system (56 bends in all) and the boot floor had to be raised about 50mm to provide necessary clearance for the huge pipes. The cost for this exhaust? Around AUD$3500.

Click for larger image

At the time of writing, the standard engine management system is retained with a retune courtesy of CAPA’s Flash Edit system. A 3 Bar MAP sensor is also installed. The fuel injectors are huge 1100cc jobs teamed with a CAPA pressure regulator and a custom pump configuration. There are no less than four Bosch Motorsport pumps pushing fuel through upsized 15mm lines.

With much time spent tuning at Bob Romano Performance Motors (BRPM), Wayn’e’s XR8 puts out enough power to give LS1 owners a nasty fright. With 12 psi boost (measured at the intake manifold), the XR has muscled out 493hp (368kW) at the wheels on BRPM’s Dyno Dynamics chassis dyno. This is exactly double the standard output – and the standard XR8 isn’t a slow car to begin with...

The standard Ford driveline is pretty tough and, so far, the original 5-speed ‘box and LSD have performed trouble-free. The only change in this area is a CAPA twin-plate clutch that’s rated up to 1000hp.

Click for larger image

With a kerb weight well over 1800kg and almost 500 horses at the treads, Wayne has seen it necessary to upgrade the Ford Premium brake package. The front and rear discs are replaced by drilled DBA items and the pads are EBC Greenstuff – a great choice for performance street use.

The XR8’s Control Blade suspension is improved using lowered King springs teamed with adjustable Koni dampers. Wayne says the big Ford does a great job getting its power down but switch off the traction control an’ it’s easy to peel strips off the tyres. And they’re not cheap tyres. Wayne has had the guards pumped nearly a quarter of an inch to accommodate huge 275/30 tyres mounted on 19 inch FPV rims. You won’t fit any bigger.

Click for larger image

These FPV rims, lowered stance and the no-nonsense quad exhaust tips are the only external hints to the car’s performance. Oh, and you might also notice the BLOWN 8 number plates...

Click for larger image

Inside, the XR trim remains standard along with the factory option Premium sound system. The only changes Wayne has executed are a Momo short-shift, a flip-down screen in the roof lining and a DVD player concealed beneath the front passenger seat. It’s all well integrated and very useable.

Click for larger image

In all, Wayne says he has invested about AUD$140,000 on his XR8 and now that he’s accomplished everything he set out to, he’s looking at moving onto another ride - maybe a Mercedes E55 AMG or a Chrysler 300C (which Wayne instantly fell in love with at Indy this year). Whatever the case, the decision to sell has been made and the asking price is about AUD$68,000 – similar to what you’ll pay for a stock FPV GT/GT-P.

We don’t reckon anyone would turn down 100 percent extra power at no extra cost...


Bob Romano Performance Motors (BRPM) +61 7 3395 8255

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...

Share this Article: 

More of our most popular articles.
The most amazing flying machines you've ever seen

Smart Technology - 5 March, 2002

Between the Wind and the Waves: Ekranoplans

Finding why a V8 Cobra replica was getting hot under the collar

DIY Tech Features - 14 April, 2009

Chasing Overheating

Setting up oxy acetylene gear

DIY Tech Features - 29 June, 2007

Beginners' Guide to Welding, Part 2

Using a multimeter

DIY Tech Features - 6 January, 2009

How to Electronically Modify Your Car, Part 4

Beautiful and sophisticated, but was it a technological dead-end?

Special Features - 30 June, 2009

The NS Savannah

Useful in literally hundreds of car modifications

DIY Tech Features - 22 July, 2008

The eLabtronics Voltage Switch, Part 1

Got an old cordless drill around the place? Here are the parts you can salvage from it!

DIY Tech Features - 8 May, 2008

A Heap of Parts for Nothing!

Drains and landscaping - and passing council inspection!

DIY Tech Features - 9 September, 2008

Building a Home Workshop, Part 5

Getting a handle on ride and handling

DIY Tech Features - 5 May, 2009

Ultimate DIY Automotive Modification Tool-Kit, Part 6

Aluminium bellmouths in minutes

DIY Tech Features - 10 December, 2013

Making your own Bellmouths

Copyright © 1996-2019 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip