Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us

The DIY Electric Sports Car

Close but not there yet

by Julian Edgar

Click on pics to view larger images

Click for larger image

Mark Fowler has built himself an electric sports car. The IT professional has done what many people dream about but few seldom achieve. The car’s based on an off-the-shelf kit Clubman, but Mark has added an electric motor, control gear and batteries.

And if the end result isn’t quite what he expected, well, the project’s not finished...

Click for larger image

The Birkin PRB S3 Clubman uses an epoxy-coated steel frame fitted with aluminium panelling. The rear suspension comprises a solid axle located by four trailing links and a Panhard rod. Front suspension uses unequal length upper and lower wishbones, an anti-roll bar and coil-over dampers.

Brakes are discs front and rear, with four-spot front aluminium calipers. Steering is non-power rack and pinion, and the kit also includes an adjustable aluminium pedal box.

But of course it’s the non-standard parts that are the most interesting.

Click for larger image

The underbonnet scenery comprises a clear plastic panel on which are mounted a throttle position potentiometer connected by cable to the accelerator pedal. The pot talks to a 1000 amp Zilla DC motor speed controller that works with an Advanced DC ‘9 inch’ electric motor, located beneath these components. Mark says the continuous output of the motor is 20kW but that short term, it’s good for something like 100kW.

The motor is bolted to a 5-speed gearbox that in turn drives a conventional tailshaft to the standard kit differential.

Click for larger image

Near the speed controller you’ll find an 800 amp main fuse, and a mains-powered battery charger capable of outputting 20 amps at the full 144V battery voltage. A DC/DC converter keeps a tiny 12V SLA battery charged – this is primarily for safety in powering lights and instruments should the main battery pack need to be shut down.

All fine and good so far – so what’s this about the project not turning out as expected? Batteries... ah batteries...

Click for larger image

Batteries are located in the nose of the car, under the boot and (when fitted), either side of the pictured electric motor. Unlike the other electric cars we’ve covered in AutoSpeed, Mark’s car uses lithium ion batteries. But in this case, it looks very much as if going to the new technology has not been the expected success. Lithium ion batteries are far lighter than lead acid batteries of the same capacity. They also have better performance characteristics in terms of being able to continuously supply high current.

Click for larger image

But the lithium ion batteries in Mark’s car have proved to be a complete flop. The first generation ThunderSky lithium cobalt designs have turned out to have an instantaneous current rating far lower than claimed. In fact, Mark told us that while the original data suggested that the batteries would be able to generate 300 amps in short bursts, the actual figure is more like 30 amps! The battery voltage also sags hugely (and stays low), the two aspects resulting in a massive shortfall in car performance.

To a degree, Mark is philosophical about the battery disaster. While recently in North America he attended electric drag racers and saw what real high performance lithium ion batteries are capable of. ThunderSky also now has a new range of lithium ion batteries, and these are apparently a much better proposition. However, having already spent around $11,000 on batteries, Mark is not looking at using the same supplier. Instead, he’s considering spending $40,000 on state of the art batteries that would give the car phenomenal performance.

But, as he wryly says, “I don’t have forty thousand dollars lying around - I’d have to sell one of my kids!”

Click for larger image

After spending around $50,000 all-up, the frustration of having a car with everything but the expected performance must be great. We went for a ride in the car and it felt taut, well suspended and was eerily quiet. The quality of build finish is excellent, with the carbon fibre dash panel featuring gauges for 80 – 160 battery volts, motor amps, motor rpm and vehicle speed. But as soon as Mark put his foot down, the needle on the battery voltage gauge sagged off the lower end... (Although it must be said that Mark has currently only 86V of batteries installed.)

In addition to new batteries, Mark would also like to give the gearbox the flick (he uses only 4th and reverse gears, and reverse is easily catered for by changing the polarity of the DC motor feed) and perhaps upgrade the DC motor and controller for something more powerful. But the latter’s another unknown – because even with the current motor/controller, decent batteries should give the 640kg car great performance.

Click for larger image

It all really depends on where you’re coming from. A high performance petrol engine with programmable engine management and perhaps a turbo, new fuel tank and fuel pumps, and a new custom radiator could easily tip the balance of fifteen or twenty thousand dollars. An engine with a lot of power could go much higher in cost. In this context, shelling out, say, $20,000 for a battery pack that would make the car go hard is reasonable.

An all-up cost of about $70,000 for a unique car with strong performance, very good handling – and running costs of only cents a day – could even be warranted.

And Mark’s struggling with just that justification...

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...

Share this Article: 

More of our most popular articles.
Why two PC fans are unlikely to improve your engine's performance...

Technical Features - 6 July, 1999

The Twin Turbo Zet

Overcoming stripped threads

DIY Tech Features - 17 June, 2014

Easy thread repair

Understanding circuits

DIY Tech Features - 9 December, 2008

How to Electronically Modify Your Car, Part 2

A breakthrough car that proved to be a step too far

Special Features - 6 August, 2008

The NSU Ro 80

The incredible land speed record Bluebird

Special Features - 3 April, 2006

World's Greatest Cars, Part 1

Using an electronic voltage switch module

DIY Tech Features - 3 February, 2009

How to Electronically Modify Your Car, Part 8

Buying and using a lathe

DIY Tech Features - 29 November, 2007

Making Things, Part 8

Want to see where you're going with modifications? Measure the airflow meter output.

DIY Tech Features - 20 January, 2005

Using the Airflow Meter as a Dyno

It changed the way everyone viewed railway travel

Special Features - 18 August, 2009

The Pioneer Zephyr

Designing for body stiffness

Technical Features - 14 December, 2010

One Very Stiff Body!

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip