Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Response

Some of this week's Letters to AutoSpeed

Click on pics to view larger images


153 km/h in a 110 Zone #1

Re 153 km/h in a 110 zone...

I am happy that Julian Edgar got off his 6 month suspension - it is truly the most difficult part of the penalty. I too was in a similar situation in Victoria. I was driving on an open, straight country road (Northern Highway) and then, bang – 140 km/h in a 100 zone.

I did all the searching I could and, like Julian, it seems I found that it’s more popular to help people who have lost their licence for drink driving than for speeding. Unfortunately I did not find a similar Act to you.

I did get some legal advice and the gist of it was:

- The lawyer could get a few km/h off (I needed 6 km/h off) for something like AUD$1100 per day in court.

- In Victoriaat least, a Judge has no power to reduce the period of a suspension. So to get a reduced/removed suspension you need to be found innocent.

Also, the fact that I have never had a speeding fine doesn't count for anything.

Now I am in the situation where I have to move from where I live because of an offence I see akin to jay walking on a quiet street.

Anon
Australia

153 km/h in a 110 Zone #2

Re 153 km/h in a 110 zone... Great article, Julian - I was glued! Perhaps there would have been another career beyond the motoring journalist! By the way, also a great job getting off the disqualification - a great many would have just copped the 6 months no matter how much it hurt.

Peter Watson
Australia

153 km/h in a 110 Zone #3

Re 153 km/h in a 110 zone by Julian Edgar...

Referring to the above article as to how you managed to evade a licence suspension. Although you state your reasons and regret for the offence, I cannot help but wonder how this article would affect other road users.

As a motoring journalist, you of all people know how the law works. The revelation of how someone evades punishment - for a lame reason at that - only diminishes people’s respect and yours for the law. The fact that you were testing aerodynamics meant that a test both before and after the modification had to be taken out. The offence was well thought out beforehand. Part of the title in the article says “the consequences” - it should say “consequences evaded”.  Although you do not boast about not losing your licence, the fact that a whole article is dedicated to it is doing just that!

Please do not publish any more stories like this as it disrespects the law. I do, however, enjoy reading articles which promote law adherence and compliance. For example, articles that refer to how to safely modify a vehicle and keep it roadworthy or legal at the same time. As a journalist you do have a responsibility to people reading your articles as they do get influenced by them.

Keep up the good work, but please no more of this.

Frank Di Giorgio
Australia

153 km/h in a 110 Zone #4

Click for larger image

Hey Julian - nice court story (153 km/h in a 110 zone). Now how about “Electric Bike - Part 4”? You could do some aerodynamic wheel mods and get it pedalling along at 153 km/h!

Kim Miller
Australia

153 km/h in a 110 Zone #5

Re 153 km/h in a 110 zone

Hmmm, responsible driving and speeding fines aren’t mutually inclusive. You do have an obligation, Mr Edgar, to act in a responsible manner whilst driving and earning a living from that driving.

Why not do some track time or find a very quiet back road where you can have scouts surveying the road to see if clear of other motorists, police, etc?

I don't think it wise to have shown other people how they can still drive via way of showing significant hardship. Yes, I have also been pinged (5 km/h over) - but not 40 km/h over.

Very disappointed...

Simon Brown
Australia

DFA No Go

I have purchased and DFA and hand controller, assembled it carefully and when I went to test it I found I couldn’t get the hand controller to work. Nothing appears on the screen. I have double and triple checked all connections and am unable to see what could be causing this. There were a few differences in the drawing and actual circuit board of the DFA - mainly locations and component that’s goes in location 5N6. I tested the DFA on a bench and everything seems good - LED lights up, etc. I plug the hand controller in and nothing - no display and no control of output signal. Do you have any suggestion on what it may be? What do I need to check – anything?

Sutheara Chea
Australia

If the screen lights up but doesn't show anything, you need to turn the adjustment pot on the screen fully clockwise. If there is no screen light up at all, you need to resolder the pins on the connectors on both the screen and the DFA.

DFA Can Do

Click for larger image

I just had a quick Q about the DFA...

It certainly looks like a good thing - and a bargain at the Do-It-Yourself price. I have a project in mind and I've been considering my options.

It has come time to change our family truckster and at this stage a Toyota RAV4 fits our needs. But they are hideously slow. My plan is to grab one of the old models and "beef it up" a tad by either building my own turbo kit or fitting a complete GT4 engine.

The DIY turbo kit is appealing from a $$$ standpoint. I have a standard T25G off my SR20DET, some old intercoolers lying around and the skills/equipment to build my own manifold. The stumbling block is engine management. I don't want to go aftermarket. Been there, done that - disappointed. And, from what I can work out, the Toyota ECU is not easy to re-program like the Nissan units I'm familiar with.

This is where the DFA comes in. Fine for fuel adjustment, but I fear the NA ignition curve would also require considerable massaging seeing a typical turbo engine's ignition curve is considerably different. I guess I could use water injection to tame the detonation around peak torque but I'd rather not have to. Any comments/suggestions would be welcomed.

Pete Liebig
Adelaide

The DFA should provide enough tuning flexibility for a relatively low boost custom turbo set-up (about 7 psi). Yes, the NA ignition mapping will be different to a factory ‘turbo’ map but if you run premium unleaded (96 – 98 RON) and tune the DFA with an ear for detonation you should end up with a pretty good result. The detonation threshold can also be lifted with effective intercooling, colder spark plugs and – as you suggest – water injection. Note that the IEBC (Independent Electronic Boost Control) is perfect for controlling a water injection solenoid valve.

“Most Interesting” AFM Bypass

I find the articles on the DFA and airflow meter bypass (Airflow Meter Bypass, Part 1) most interesting...

I have often thought about an airflow meter bypass, but just never got round to doing the R&D. However, what about us unlucky bastards, who own a car with a Karman vortex airflow meter? Apart from tossing the engine management for something else it’s not easy... Mine has reached the point where the duty cycle is at maximum - past this the engine thinks that there is no more air going into the engine, when in fact there is. I've never built up the cash to go programmable, so I’ve just pulled back boost pressure until I can work out how to deal with it... I started with a rising rate fuel pressure reg, not really knowing at that stage that the AFM was the culprit. The pressure reg made the drivability really average and the only way you could drive the car was to never allow the management to go into open-loop... This means staying below full throttle and warming the car up before driving it!

Adrian Wortley
Australia

If the DFA (suited to 0 – 5 volt airflow meters) is popular, we believe Silicon Chip magazine will develop a system to suit frequency output meters as well. Write to them!

Dual AFMs?

Click for larger image

Re: Airflow Meter Bypass Airflow Meter Bypass, Part 1.

Whilst reading this article I was wondering about the possibility of running two airflow meters? These could be run in parallel or perhaps a more complex system that’s split across cylinders. From memory, some BMW V8s (I think Audi and Benz do it as well) run split systems. In very simplistic terms couldn't you take both signals, protected by diodes to stop cross talk and "half" the combined output to get average? Just food for thought. Seems to me this approach would work best on ‘V’ or horizontally-opposed engines where it's ‘easy’ to split intakes.

Simon Brown
Australia

We imagine it would be possible to configure a pair of AFMs in parallel and tune using the DFA. However, it is far cheaper and easier to use the standard airflow meter with a large bypass with the system tuned with the Digital Fuel Adjuster.

1UZ Information Treasure Chest

Just responding to Garth Dorrans' query about finding specs for the 1UZ-FE (Response). The best source of information on the 1UZ and for discussing modifications is www.lextreme.com

Damien Smith
Australia

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
DIY testing of your engine's water pump

Technical Features - 11 June, 2008

Water Pump Testing

Examining the natural frequencies of suspension pitch and roll

Technical Features - 21 February, 2012

More than just bounce...

DIY and commercially available vortex generators

Special Features - 10 October, 2006

Blowing the Vortex, Part 3

A very cheap workbench for your power tools

DIY Tech Features - 5 February, 2013

Building a power tool workbench

Improve BOTH power and fuel economy!

DIY Tech Features - 9 September, 2008

Auto Air Conditioner Controller

Techniques to revolutionise your car modification

DIY Tech Features - 31 March, 2009

Ultimate DIY Automotive Modification Tool-Kit, Part 1

How to organise your home workshop for best results

DIY Tech Features - 25 June, 2008

Laying Out a Home Workshop

The revs and loads at which engines use least fuel

Technical Features - 10 April, 2008

Brake Specific Fuel Consumption

The Eighties Group B rally cars with up to 600hp

Special Features - 21 February, 2003

The Early Days of Turbo Part 2

What you need to know about arc welding

DIY Tech Features - 20 June, 2007

Beginners' Guide to Welding, Part 1

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip