Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Giant Muffler Comparison - The Mufflers!

Designs and descriptions of the tested mufflers.

By Julian Edgar and Graham Pring, Pics by Julian Edgar

Click on pics to view larger images


Click for larger image

The AutoSpeed muffler comparison tested no less than 22 mufflers, 17 of which were brand new aftermarket designs and 6 of which were used, factory mufflers. We included the used factory mufflers to help establish a baseline - if the standard mufflers were already better than the aftermarket designs, why"d you bother going aftermarket? We also decided to standardise on mufflers with pipe diameters around two inches. Why? There were a number of reasons. Firstly, co-author Graham Pring had already sourced a huge number of new mufflers in this size. He intended picking the best and using two of them (one each side) on his V8-powered Cobra replica. Another reason is that sourcing comparable factory mufflers is much easier in two-inch pipe, rather than 2.5, 3 or 4 inch!

But if you are interested in using mufflers with tube sizes larger than those tested, look carefully at the results of the different muffler types - ie the performance of straight-thru, versus tri-flow (ie reverse flow), versus baffled mufflers. These lessons in noise and flow will also hold true for larger versions of the same mufflers.

The descriptions of the mufflers that follow are based on an external examination only - the exception is the Holden muffler that was cut open. Dimensions and masses are approximate.

Straight Thru Designs

We have defined a straight-thru design as having a single perforated pipe connecting the inlet to the inlet in a straight line. Note that in the case of the Exhaust Technology "tube", an expansion chamber is also positioned mid-way through the muffler.

Genie Resonator
Click for larger image

Straight-through stainless steel absorption muffler. Round hole perforated tubing with stainless steel wool absorption material, with welded seams and polished. Dimensions: 30x13cm Mass: 2.5kg

Genie Tornado
Click for larger image

Straight-through absorption stainless steel muffler. Round hole internal tubing with stainless steel wool plus other absorption material. Welded seams and polished. Centre / offset ends. Dimensions: 36x11x24cm Mass: 4.7kg

Exhaust Technology (M) 14614
Click for larger image

Straight-through stainless steel absorption muffler. Round holes for full length. Larger bore internal tubing. Welded seams and polished. Dimensions: 36x15 Mass: 4.5kg

Exhaust Technology "tube"
Click for larger image

Straight-through absorption mild steel muffler with round holes. Expansion chamber in centre of tube. Welded seams. Dimensions: 44x9cm Mass: 2.5kg

Walker 20627 Resonator
Click for larger image

Straight-through mild steel absorption muffler. Directional inward punched louvres with absorption material. Welded seams. Dimensions: 28x9cm Mass: 1.8kg

Walker PF41 Resonator
Click for larger image

Straight-through mild steel reflection style resonator with outward punching for half the tube length. Rolled seams. No absorption material. Dimensions: 25x10cm Mass: 1.4kg

Tri-Flow (Reverse Flow) Designs

A tri-flow (reverse flow or "turbo") muffler takes the exhaust gas on an S-shaped path through the muffler. The exhaust gas travels to one end of the muffler, is turned through 180 degrees and heads back to the first end. There, it is again turned through 180 degrees before it passes to the outlet. Tri-flow mufflers normally have three internal chambers.

Genie Turbo
Click for larger image

Tri-flow reflection / absorption stainless steel muffler. Round hole internal tubing with stainless steel absorption material. Welded seams and polished. Dimensions: 36x11x25 Mass: 4.5kg

Berklee BM482
Click for larger image

Tri-flow reflection mild steel muffler. One end inward directional punched louvres, other end solid tube. Rolled seams. Dimensions: 40x10x19cm Mass: 3.9kg

Berklee BM480
Click for larger image

Tri-flow reflection mild steel muffler. Inward directional punched louvres with reduced diameter internal pipework to 42mm. Rolled seams. Dimensions: 40x10x19 Mass: 3.7kg

Walker 17730 Super Turbo
Click for larger image

Tri-flow reflection / absorption mild steel muffler with tubes with holes punched outwards and rolled seams. Reduced internal diameter to 45mm. Absorption material around centre core. Dimensions: 36x9x20 Mass: 3.4kg

Walker DM8X4 14002
Click for larger image

Tri-flow reflection mild steel muffler with one plain end tube and one end tube with holes punched outwards. No visible absorption material. Rolled seams. Offset / offset. Dimensions: 35x11x21 Mass: 3.4kg

Walker PF29
Click for larger image

Tri-flow reflection mild steel muffler with both end tubes featuring holes punched outwards. Reduced internal pipe sizes to 40mm. Rolled seams. Dimensions: 25x10cm Mass: 1.4kg

Dogleg

A dogleg muffler is a close cousin to the straight-through muffler, except the exhaust gas travels through an expansion chamber via a 'dogleg" path (ie two 90 degree changes in flow).

Walker Lukey L0099
Click for larger image

Single flow reflection / absorption mild steel muffler with round hole perforated tubes. Centre expansion chamber. Absorption material around end sections. Rolled seams. Dimensions: 35x11x20 Mass: 3.5kg

Berklee BM261
Click for larger image

Single flow reflection / absorption mild steel muffler. Middle expansion chamber with absorption material around both ends. Inwards directional punched holes with rolled seams. Dimensions: 40x10x19cm Mass: 3.6kg

Baffled

We have placed all of the other muffler designs in this category. Baffled mufflers often have multiple compartments, several changes of gas direction, and work on both absorption and reflection principles.

Berklee BB4413
Click for larger image

Multiflow reflection mild steel muffler. One end tube inward-punched directional louvres, other end solid tube. Rolled seams. Dimensions: 49x11x26cm Mass: 4.9kg

Berklee BB3912
Click for larger image

Multiflow reflection mild steel muffler. One end tube inward punched directional louvres in reduced size tubing. Other end solid tube with reduced size internal tubing. Rolled seams. Dimensions: 49x11x26cm Mass: 4.9kg

Manumatic UNI3480-2
Click for larger image

Multiflow reflection mild steel muffler. One end tube inward punched directional louvres and other end with round hole tubing. Rolled seams. Dimensions: 49x11x26 Mass: 5kg

Factory Mufflers

With the exception of the Holden designs, the inner workings of these mufflers aren't clear - we couldn't cut them all open! However, they use multiple baffles - other than the Holden resonator, none is a straight-thru design.

Holden Resonator (55mm)
Click for larger image

Straight through absorption steel muffler. Fifty five millimetre tubing with outward-punched holes along one-third of the larger 60mm internal tubing. Rolled seams. Dimensions: 27x12x25cm Mass: 4kg

Honda Prelude
Click for larger image

Probably from a late VTEC model. Dimensions: 35x25x29cm Mass: 5.2kg

Nissan
Click for larger image

Probably from a Pintara TRX. Dimensions: 45x15x31 Mass: 5kg

Mazda 929
Click for larger image

Dimensions: 50x20x23 Mass: 5.2kg

VW Golf
Click for larger image

Four cylinder late model Golf. Dimensions: 45x13x24 Mass: 5kg

Commodore Muffler 55mm.
Click for larger image

Multiflow reflection / absorption steel muffler. Four internal chambers with side tubes in main tubes. Two outer skins with a fine layer of fibreglass mat between the inner and outer skins. Rolled seams and spot welded skins. Dimensions: 27x12x25 Mass: 4kg

Contacts:

Exhaust Technology
08 8272 7500

Awesome Automotive
08 8277 3927

F&M Cylinder Heads
08 8294 2515

Morphett Vale Exhausts
08 8384 6400

Giant Muffler Comparison - Testing Procedures
Giant Muffler Comparison - Detailed Test Results
Giant Muffler Comparison - Summary of Results

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
Using a multimeter

DIY Tech Features - 6 January, 2009

How to Electronically Modify Your Car, Part 4

The series conclusion

DIY Tech Features - 15 May, 2012

A New Home Workshop, Part 10

Single-handedly erecting the framework for a home workshop

DIY Tech Features - 26 August, 2008

Building a Home Workshop, Part 3

Stormwater and council inspection

DIY Tech Features - 20 March, 2012

A New Home Workshop, Part 6

If you do any work with your hands, you need one of these.

DIY Tech Features - 28 July, 2008

Bench Vices

Wrapping-up our major series on doing your own car modifications

DIY Tech Features - 12 May, 2009

Ultimate DIY Automotive Modification Tool-Kit, Part 7

Books that you'll keep forever

Special Features - 24 March, 2009

The Ten Must-Have Books

How the air moves under a car

DIY Tech Features - 9 March, 2005

Modifying Under-Car Airflow, Part 1

Tweaking the engine management to run non-standard mixtures in closed loop

DIY Tech Features - 12 January, 2005

Altering Closed Loop Mixtures

Almost beyond belief in its brilliance

Special Features - 12 May, 2009

The Amazing Tesla

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip