Magazines:  Real Estate Shopping: Adult Costumes  |  Kids Costumes  |  Car Books  |  Guitars |  Electronics
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Response

Readers Write

Click on pics to view larger images


Diesel Wastegate Creep

First of all, i´d like to congratulate your excellent magazine and articles, specially DIY Tech Features. I´d like to know what do you think of attempting the Killing Wastegate Creep project on a turbo diesel without electronic boost control.

Telmo Brandão

Portugal

The speed with which a turbo diesel comes up on boost is often more related to fuelling than wastegate control. That said, it is certainly worth trying the ‘killing wastegate creep’ approach.

Doing the Mods

I like you site and have used it as referances for many of my experiments. Although no one told me about this one until after my very expensive manufacturing and mucking about with making my own... Cool Stuff - Manifold Insulators

Cheers ears...

Air pressures over hood - http://www.fordmods.com/viewtopic.php?f=38&t=7200865536.6

Phenolic Spacer - http://www.fordmods.com/viewtopic.php?f=1&t=72184

Larger throttle body - http://www.fordmods.com/viewtopic.php?f=1&t=71971

Car of mine http://www.fordmods.com/viewtopic.php?f=53&t=69180

Photos and stuff http://www.photobucket.com/futurlane

http://www.fordmods.com/commercial-sponsors-forum-f53/futurlane-ultimate-budget-build-t69180-440.html

Tony

New Zealand

Light-Weight HPV

I really liked your article covering the ultra light-weight car that the UniSA students are building (starts at Building an Ultra Light-Weight Car, Part 1). This kind of information is exactly what I like to get, so please keep up the good work.

The method of construction is very interesting. Your article tells me that using a honeycomb core material may actually be feasible for a backyard DIY person. Previously, I had considered this material to be (financially) out of my reach.

Now here is a challenge for you: Combine the honeycomb material and the basic design of your latest HPV trike to make build number 4. The result would be a vehicle that is (partially) enclosed and may give less wind resistance. I think that one of the most difficult parts would be keeping the overall weight as low as your current steel tube design.

Again, please keep up the great articles.

Dave Hottle

United States

Number 4 trike is currently under construction – and it uses chrome moly tube. However, we are closely watching the development of an ultra lightweight fairing that would suit such vehicles.

Bonnet Lift

Just had a quick question about the effectiveness of using washers to raise the rear of the bonnet. Does it increase cooling in the engine bay or is it all nonsense?

Matt Allen

Australia

To be sure you’d need to do some testing. Based on the tests of pressures above and below bonnets that we have done, we’d guess it wouldn’t work. See Undertrays, Spoiler & Bonnet Vents, Part 2

Praise

Great magazine. I gave up reading car magazines 20 years ago but since discovering yours I visit it often.

Ron Miller

Australia

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
Finding the best location for engine bay vents

DIY Tech Features - 10 June, 2004

Undertrays, Spoilers & Bonnet Vents, Part 3

Shaping sheet metal

DIY Tech Features - 6 May, 2014

Panel beating for beginners

Easy, cheap and effective

DIY Tech Features - 30 April, 2013

Building a home sound amplifier, Part 1

Measuring analog and digital signals

DIY Tech Features - 24 February, 2009

How to Electronically Modify Your Car, Part 11

Measuring ride quality

Technical Features - 4 May, 2010

Ride Quality, Part 2

An ultra high pressure do-it-yourself water injection system

Technical Features - 22 April, 2008

The H2O Way, Part 2

So what stuff is worth salvaging out of old air conditioners?

DIY Tech Features - 20 April, 2010

The Good Bits out of old Air-Conditioners

Getting planning approval

DIY Tech Features - 7 February, 2012

A New Home Workshop, Part 3

Battery monitoring like you've never seen it before

DIY Tech Features - 3 September, 2013

One very smart LED

How to design for ultra light weight

DIY Tech Features - 15 June, 2007

Making Things, Part 7

Copyright © 1996-2018 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip