Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Ballistic Bug-Eye

A MY02 bug-eye WRX with the grunt of a US-sourced STi 2.5-litre motor, nitrous and all the bolt-ons!

Words by Michael Knowling, Pix by Julian Edgar

Click on pics to view larger images


Since the Subaru Impreza WRX debuted in Australia, we’ve seen all sorts of power-up conversions. It’s easy to fall into the trap of thinking you’ve seen it all before – but then along comes something different. Try a MY02 WRX kitted out with an ex-US 2.5-litre STi motor – not to mention nitrous and all the bolt-ons!

Click for larger image

This car – a MY02 Club Spec Evo 5 – is owned by Joe of Melbourne. Joe has owed some pretty tasty rides, including the all-out Honda CRX seen at CRX-pression. “After a while, though, I decided I wanted something quick – and the WRX was it,” says Joe. After deciding on a Rex, Joe opted to splurge a little extra cash for the Club Spec Evo 5 that came loaded with an in-dash 6-stack CD, electric sunroof and exclusive stickers. And you can’t overlook that Evo 5 standout yellow paint! Just 140 Club Spec Evo 5 WRX sedans and 60 wagon versions were sold locally.

Despite the move up to Rex power, Joe soon got used to the out-the-box performance. “It’s a good car in standard form, but once you’re used to modifying cars it’s difficult to hold back,” he says. With a standard output of 160kW (at the flywheel), this Club Spec began walking its modification path with the fitment of a X-Force 3-inch mandrel exhaust, APS high-flow air intake and a boost enhancement. With greater airflow through the EJ20 quad-cam motor, Joe enjoyed a significant increase in performance – particularly in the all-important mid-rpm zone.

Click for larger image

In the current world of WRX modification it takes something pretty serious to earn any real cred. Joe went the next step with an APS front-mount air-to-air intercooler, UniChip interceptor, TurboSmart Type 2 blow-off valve, Go Fast Bits (GFB) pulleys and SR50 roller-bearing turbocharger. Keen on having on-demand performance, Joe also had G-Tech Performance fit a 60hp nitrous shot that’s activated via a button on the steering wheel. There is no throttle position input.

The fuelling system was also upgraded to include a Bosch Motorsport in-tank pump and high-flow 550cc injectors. The ignition remains factory except for the use of one-range colder spark plugs.

In this configuration the Club Spec Evo 5 eased out 250kW at all-fours – more than enough to see off the average modified WRX. But then things got bigger and better...

Click for larger image

By magic, G-Tech Performance sourced a near-new 2.5-litre turbo engine from a crashed Impreza STi in America. How lucky was that?! (Though not so lucky for the original owner...) Fortunately, the engine came undamaged from the accident and was slid into the snout of Joe’s car without need to fiddle about with internals (or fixing broken cam banks, as is often the case with crashed Subarus). The only mod done at the time of installation was a minor flow job on the DOHC, 4-valve-per-cylinder heads and the fitment of an APS billet flywheel and brass button custom clutch. Interestingly, the Oz-spec MY02 ECU doesn’t have the output to control the STi’s variable inlet cam timing system – the VCT hardware was therefore removed from the engine.

Click for larger image

The driveline – a common weak link in the armoury of a go-fast WRX – has held up amazingly well. Joe is still on gearbox Number One – for now! The driveshafts also remain stock. Unfortunately, there are no power figures available since the 2.5-litre engine has only just been sorted and run-in. However, it’s safe to say that the engine will make comfortably more power than the original 2-litre, along with much improved torque throughout the rev range – something that comes in handy when you’re spinning a fairly big SR50 turbocharger.

Click for larger image

The stock MY02’s 17-inch alloy rims are pretty good for a factory effort, but – like the engine – a bigger-is-better philosophy improves matters considerably. Giant 19-inch polished aftermarket rims with 235/35 tyres now fill out the wheel arches to the max. Further visual impact comes from lowered coil springs that dump the ride height by approximately 3½-inches – a pretty serious lowering job! While admiring Joe’s WRX in our pics you’ll probably notice its absolutely immaculate presentation. This should be no surprise when we tell you Joe is a major organiser of the popular and ever-growing Show-Off events (check out www.showoff.com.au. Ahh, so the personalised number plates and custom grille emblem (with Show-Off lettering replacing boring ol’ Subaru) now makes sense! And we can assure you, despite the top-notch presentation, Joe’s WRX is used almost as an everyday-er.

Click for larger image

Inside, the already sports-oriented WRX cabin has received the necessary gauge upgrade to keep an eye on the tuned engine. The A-pillar now carries an AutoMeter Pro-Comp air-fuel ratio meter and boost gauge. The OE audio head unit also leaves something to be desired, so it has stepped aside to make space for a Pioneer DVD unit. The speakers are standard for now because a simple head unit swap has already made a world of difference to sound quality.

Click for larger image

If you live in Melbourne you might spot Joe’s seriously grunty and immaculate WRX striking a pose at upcoming Show-Off events – and possibly it’ll be presented even bigger and better than seen here. How? Well, it seems Joe is pretty hooked on the idea of stroking the already-large boxer four to around 2.8 or 3.0-litres... There’s no argument when he says, “that’ll be going further than anyone else has done!”

You ain’t seen it all yet!

Contact:

Show-Off
www.showoff.com.au

G-Tech Performance
+61 3 9305 2888
www.gtech.com.au

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
Under $10 for a remote-controlled immobiliser!

DIY Tech Features - 27 November, 2012

DIY classic car immobiliser

How to monitor the output of a factory-fitted wide-band oxygen sensor

DIY Tech Features - 23 September, 2008

Monitoring Factory Oxygen Sensors, Part 2

What's happened to electronic advances in cars?

Special Features - 19 May, 2009

Car Electronics Going Nowhere?

Do it yourself development of an aero undertray

DIY Tech Features - 3 June, 2004

Undertrays, Spoilers & Bonnet Vents, Part 2

The 1100hp Porsche 917

Special Features - 18 April, 2003

The Early Days of Turbo Part 3

Building a programmable temperature alarm

DIY Tech Features - 13 October, 2009

eLabtronics EZ System, Part 2

DIY Module that can pulse horns, lights or solenoids

DIY Tech Features - 23 June, 2008

The eLabtronics Pulser, Part 1

The story behind the Datsun 240Z

Special Features - 16 July, 2008

The First Zed

Turning the voltage switch into a standalone temperature or light switch

DIY Tech Features - 29 July, 2008

The eLabtronics Voltage Switch, Part 2

Is it worthwhile tuning an engine cylinder by cylinder?

Technical Features - 4 February, 2008

Cylinder-Specific Tuning

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip