Magazines:  Real Estate Shopping: Adult Costumes  |  Kids Costumes  |  Car Books  |  Guitars |  Electronics
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Five Channel USB Data Logger, Part 1

A new low cost data logger

by Julian Edgar

Click on pics to view larger images

At a glance...

  • Simultaneously logs up to five 0-5V signals
  • Can log from 10+ times a second to once every 10 minutes
  • Plug-in USB port connectivity
  • On-screen multimeter display shows real-time measured voltages
  • Real time graph display
  • Simple software allows graphing and overlaying of traces
  • Export of logged data to spreadsheets
Email a friend     Print article

The worth of data logging when modifying cars is now common knowledge. Programmable engine management systems have in-built logging facilities and many factory management systems with aftermarket programming software can log engine signals. Even cars with just an OBD II port can have simple, low speed logging performed of certain engine management parameters.

But what about if your car fits none of these categories? Or you have an OBD port but want higher speed logging?

In the past it’s been hard to come up with a simple and cheap way of logging signals – but now there’s a new product on the market that achieves just this. It’s not perfect – it won’t log frequency signals like engine revs for example – but the price and ease of use still makes it one very useful product.

It is also ideal for monitoring battery voltages and the like.

The logger is produced by eLabronics and was developed as a result of their involvement with educational electronics, especially in schools. The company realised that with the writing of some software and some other slight adaptations, an existing product (a PIC programming board) could be easily altered in function to become a five channel, 0-5V USB data logger. Schools were crying out for such a tool that could be used to monitor the functioning of projects like solar cars, programmable robots and so on.

But the resulting product has application well beyond just schools…

The data logger, complete with USB cable, software and 5 probes, costs just AUD$86.90.

Using the Logger

Click for larger image

The logger comprises a small PCB 75mm x 50mm. It is supplied without a box, so you should either wrap it in insulating tape or find a box to place it in.

Click for larger image

Also supplied is a short wiring loom that has at one end a multi-pin connector (it plugs into Port A on the PCB) and at the other end, 7 clip-on connectors. These connectors comprise:

  • Black – ground connection

  • Red – 5V supply for powering sensors (20mA max)

  • Five white or yellow connectors – the signal inputs

The input signals must be in the 0-5V range.

Electrically connecting the logger is very simple. Let’s say that you want to monitor the voltage output of the throttle position sensor. Here’s what you do:

  • Connect the black probe to the chassis (ground)

  • Connect probe #1 to the signal output of the throttle position sensor

  • Plug one end of the USB cable into the logger and the other end of the cable into the PC’s USB port. The yellow LED on the logger will light up.

Next, launch the software.

Click for larger image

This screen will appear.

Click for larger image

Check the ‘Enabled’ and ‘Show Graph’ boxes for Channel 1....

Click for larger image

....and this display will appear.

Click for larger image

Press the ‘Start Recording’ button and the monitored voltage will be displayed and a graph of the logged value will be drawn.

Click for larger image

Press the ‘Show Log’ button and the data readings (and the time at which they’re taken) will be shown in another box.

Click for larger image

After the ‘Stop Recording’ button has been pressed, you have the option of exporting the log file. This is done by File > Export Log > Analogue Export. The file is exported as a .csv file that can be read in Excel. Note that this is the only way of saving your logged file!

Sampling Speed

Click for larger image

By clicking on the Interval button the sampling speed can be set at any of eight values - from 10Hz (ie 10 times a second) to once every 10 minutes. The default is 10Hz.

Note there is also a faster setting than 10Hz – it’s called ‘Max’. Maximum is the fastest that the particular PC and USB interface can run at, and also depends on how many channels are being monitored. On my PC, monitoring one channel, ‘Max’ was 16Hz.

In all cases, the logged record shows the actual timing values that were used when the data was collected.

Multiple Channel Inputs

If more than one channel is to be monitored, additional input probes are connected and the respective channels activated in the software. Up to five channels can be monitored real time and logged.

Click for larger image

The channels can also be graphed on the one display – press the ‘Show Comparison’ button to do this.

Note that in this logger application we don’t use the ‘Digital Manipulation’ function of the software.

Conclusion

Click for larger image

This is a very simple logger – and that makes it very quick and easy to use. It can monitor up to five channels, allows you to set the sampling rate to the required application, has effectively no limit to the data it can collect, and the log file can be exported for graphing or other analysis in a spreadsheet program.

Next week: using the logger and working with input voltages higher than 5V.

Contact: www.elabtronics.com

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
Finding the best location for engine bay vents

DIY Tech Features - 10 June, 2004

Undertrays, Spoilers & Bonnet Vents, Part 3

The rear suspension

DIY Tech Features - 9 June, 2009

Chalky, Part 5

Mixing a dose of LPG with diesel to improve power and economy

Technical Features - 12 March, 2008

Diesel LPG - an Amazing Breakthrough

The story behind the Datsun 240Z

Special Features - 16 July, 2008

The First Zed

Is it worth producing your own fuel?

Special Features - 4 March, 2008

Making Your Own Bio-Diesel

Changing the weight of electronically-controlled power steering

DIY Tech Features - 26 February, 2002

Modifying Speed-Sensitive Power Steering

Using an electronic voltage switch module

DIY Tech Features - 3 February, 2009

How to Electronically Modify Your Car, Part 8

Easy - but only in retrospect!

DIY Tech Features - 28 June, 2011

Upgrading the Roomster's Front Brakes

How tyres really work on the road

Technical Features - 9 August, 2007

Tyres, Grip and All That

Fuel economy of 1 litre/100km from an amazing car

Technical Features - 11 June, 2002

The World's Most Fuel-Efficient Car

Copyright © 1996-2017 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip