Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Installing New Wheel Badges

Finishing touches

by Julian Edgar

Click on pics to view larger images

At a glance...

  • Replacement centre badges for alloy wheels
  • Cheap, easy to fit and custom made
Email a friend     Print article
This article was first published in 2004.

Click for larger image

If you’ve got non-standard alloy wheels on your car, chances are that the centre badge doesn’t fit the aesthetics very well. It might be because the badge features the wheel manufacturer’s name standing bold and looking ugly, or if you’ve sourced the wheels off another make, the brandname might be completely wrong.

As in, a Ford badge on a Lexus. Or vice versa.

However, getting new centre badges made and then installing them is cheap, easy, and looks great.

This is how the centre wheel caps looked - a silver disc with a Ford oval badge inset. Looks good on a Ford, not so good when the wheels were being used on a Lexus.

Click for larger image

It’s not widely know but new badges can be made very cheaply. These Lexus badges, printed on 0.5mm aluminium and then covered with resin, cost only AUD$5 each to have custom made. Look in the Yellow Pages under ‘Badge Making’.

Click for larger image

The first step was to remove the Ford badge. This was glued on and could be unstuck with the assistance of a small screwdriver.

Click for larger image

The area of the cap that was going to be covered by the badge could then be scuffed with sandpaper, which allows the glue to grip better.

Click for larger image

The badge was then curved to match the domed cap. The badge was inserted face-down in a small glass bowl - this supports the edges of the badge. Next gentle thumb pressure was applied in the middle of the badge to curve it into the right shape.

Click for larger image

As can be seen here, the amount of curvature that was needed wasn’t a lot – but it makes a big difference to how the badge sits on the cap.

Click for larger image

The badge was glued to the cap using silicone adhesive. Don’t put on too much – you don’t want it squeezing out everywhere.

Click for larger image

Finished...

Click for larger image

...and on the car.

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
So what's detonation and how can it be detected?

DIY Tech Features - 2 November, 1999

DIY Detonation Detection Part 1

A 2-amp variable voltage power supply for under $10!

DIY Tech Features - 1 October, 2013

Cheap Power!

Part two of an R32 Skyline GT-R modification process

DIY Tech Features - 6 September, 2011

GT-R Unleashed

The frame, seat and chain path

DIY Tech Features - 16 June, 2009

Chalky, Part 6

Modifying the regen braking system on a Toyota Prius

DIY Tech Features - 15 December, 2004

A World First: Modifying Regen Braking

Getting a great looking and durable finish

DIY Tech Features - 21 October, 2014

Powdercoating of fabricated parts

The incredible land speed record Bluebird

Special Features - 3 April, 2006

World's Greatest Cars, Part 1

A brilliant do-it-yourself handheld spotlight or bike headlight

DIY Tech Features - 11 February, 2008

Building a High Performance LED Lighting System, Part 1

What's happened to electronic advances in cars?

Special Features - 19 May, 2009

Car Electronics Going Nowhere?

One of the most significant cars ever

Special Features - 21 April, 2009

The Amazing Citroen DS

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip