LPG systems have been around for decades. “I’m
putting my car on gas” is something that has been said for years by caravan
owners, those with big V8s and commercial vehicle owners. Trouble is, while
there have been savings in fuel costs, ‘gas’ cars have also had a long and well
deserved reputation for poor tailpipe emissions, lousy performance and crap
reliability. In fact, years ago I had a standing bet with my partner that if we
saw a late model car stranded by the side of the road with the bonnet up, it
would have an ‘LPG’ sticker on the number plate. I usually won the money.
But oh boy, have things now changed!
Instead of a restrictive venturi placed in the
intake system (sucking away performance on both gas and petrol),
electronically-controlled gas injectors are now used, posing no restriction to
the engine. Instead of bodged-up and intercepted oxy sensor signals, now the
original petrol engine management system works with almost entirely normal
functionality – even to the extent that full OBD fault codes and OE diagnostics
are still valid.
So is the story all good? No, there are still some
disadvantages but for many people, these are now well outweighed by the cost
savings possible.
Vapour Gas Injection
To get the good gear on vapour gas injection, we
spoke to John Parnell of Parnell LP Gas Systems. Sixty-five year old John has
been developing automotive LPG systems all his working life and has a wealth of
experience in an amazing variety of gas systems. He believes the company’s
current system to be head and shoulders above any gaseous LPG system he has
used.
The system uses components primarily developed by
Prins Autogassystemen BV of The Netherlands. Prins supplies the dedicated LPG
ECU, the wiring loom, regulator/converter and filter/sensor assemblies.
However, the most important parts of the system –
the injectors – are manufactured by Keihin, a Japanese company with close links
to Honda. Because the performance of the system is very much based on how these
injectors work, it’s worth looking at them more closely.
Injectors
Unlike many other LPG injection systems, the
Keihin injectors are purpose-designed for gaseous fuels. (Other systems often
use modified solenoid valves.) The current DM-4 series of injectors can be used
with LPG, CNG and hydrogen. The injectors use a Teflon-coated plunger to ensure
long life with dry fuels (life is quoted at 290 million cycles – typically
240,000 kilometres) and have a rubber seat to reduce noise and leakage. (From
outside the car the LPG injectors are clearly noisier than petrol injectors but
they’re inaudible in the cabin.)
The injectors are of the peak-and-hold design,
drawing 4 amps at peak and 1.5 amps in the hold phase. They can be pulsed at
frequencies of 50 – 400Hz and can operate in a temperature range of -40 degrees
C to +120 degrees C. Their resistance is 1.25 ohms and they have an inductance
3.5mH. Maximum fuel pressure is 3.9 Bar (57 psi).
The injectors are available in various sizes – for
example, 32cc, 42cc, 52cc, 62cc, 73cc and 100cc (measured with a 24 millisecond
pulse width at 2.55 Bar
[37 psi]
fuel pressure.)
However it is one specific aspect of the
injectors’ performance that makes them suitable for the control system that will
be described in a moment. That aspect is the linearity of their flow versus the
injector opening time. As this graph shows, from a pulse width of about 4
milliseconds up to 24 milliseconds, the flow of the injectors increases
linearly. In this regard they are similar to petrol injectors.
Control System
Now if the gas injectors behave in a similar way
to petrol injectors, to provide the correct gas fuelling all that needs to be
done is to apply a constant correction factor to the signal that would normally
operate the petrol injectors – and use that corrected signal to operate the gas
injectors!
For example, at idle the petrol injectors might
need a pulse width (opening time) of 2.89 milliseconds to provide the right
air/fuel ratio. In the same conditions, the gas injectors might need an opening
time of 3.29 milliseconds – some 13.8 per cent more. If this 13.8 per cent
greater opening time of the gas injectors provides the right gas fuelling, the
same proportional increase in gas injector duty cycle will also work at other
engine loads. Because, like the petrol injectors, the gas injectors have linear
behaviour, such a simple approach will provide very close to the correct
fuelling.
In fact, the gas ECU can be programmed to have the
gas injector correction curve altered in gradient by the simple means of
altering the idle and full load numbers. A straight line is then drawn between
these points. Remember, the gas ECU is using the variable duty cycle signal
normally provided to the petrol injectors and is then simply applying a certain
correction to the length of time the gas injectors are open for – the tweaking
of the line on the graph just alters this correction relationship.
Now you might wonder if such an approach will be
sufficiently accurate. But there’s another string to the bow. Because the car’s
closed-loop system still works as it did originally, if the gas supply is
incorrect at any point, the ECU will self-learn a changed duty cycle at that
load point. It ‘thinks’ it is operating the petrol injectors but in fact this
signal is just being used by the LPG ECU as its input in determining the LPG
injectors’ duty cycle – but the outcome is the same: changed mixtures at the
point needing correction.
(An interesting point made by John Parnell is that
this type of self learning has the potential to corrupt the petrol engine fuel
map – when the owner switches back to petrol, you don’t want parts of the petrol
map to be lean or rich because of information it has learnt while on gas.
Therefore, the self-learning that occurs on gas must always be limited – in
other words, the gas tune has to be very close to optimum to start with.)
When setting up the LPG control system, a
proprietary OBD scanner is used to look at the car’s short term fuel trim. If,
after the swap to gas, this shows that major short term learning is occurring
(ie the car is using the feedback of the oxygen sensor to change the mixtures)
then the gas fuelling needs to be better matched to the engine.
So the LPG injection system uses the following
control functionality:
-
Linear flow gas injectors that behave much like
petrol injectors
-
Dedicated LPG ECU control of the injectors, using
as the main input the duty cycle that the petrol ECU provides the petrol
injectors, corrected by the LPG ECU for the gas injectors
-
Feedback of the car’s original oxygen sensor(s) to
correct small deviations from optimal mixtures
The LPG ECU also has inputs from an engine coolant
sensor (positioned on the converter), gas pressure and temperature sensors
(positioned on the filter), the original oxy sensor(s), and the engine
crank-angle sensor (ie rpm). The ECU can be mounted in the engine bay.
The LPG control system also provides an ‘injector
replacement’ signal to the original ECU so that when the petrol injectors are
switched off, no fault codes are generated.
The huge advantage of taking this approach to
controlling the gas injection is that all the factory petrol engine management
logic remains in place. That includes aspects such as over-run fuel cut-off, rev
limiter, traction control engine power limiting, full throttle enrichment and so
on.
The ignition timing is not changed when running on
LPG.
Turbo
Cars?
Parnell
LP Gas Systems has in development a system suitable for turbo cars. It’s
currently being trialled on a Falcon XR6 Turbo. Contact the company for the
latest information on this development.
|
In Use
In operation, the car always starts on petrol.
This is primarily because there is minimum coolant temp below which the
converter cannot function in converting the liquid LPG to a gas. A short time
after the coolant has reached the minimum operating temperature (both the time
and the temperature are programmable), the LPG control system automatically
switches off the petrol injectors and turns on the gas injectors. If the
original petrol injectors were fired sequentially, so will be the gas
injectors.
The driver is provided with a small dash-mounted
interface unit. This combines the function of LPG fuel level gauge, gas/petrol
changeover switch, warning beeper and fault code indicator.
The internal beeper sounds if gas pressure falls
too low and the system switches back to petrol (eg because the gas is running
out). It also warns the driver if a major fault condition has developed that
again causes the car to switch back to petrol. (John made the point that the
change to petrol is so smooth many drivers are not aware of it; a potential
problem if the car is out of gas and then runs out of petrol!)
The LPG system can log about 50 faults, including
stalling on the switch to LPG, gas temp too high or too low, gas converter slow
to warm up and ‘missing’ at high revs. A particularly interesting fault that is
logged is when the gas system pressure falls to less than 1.25 bar within 4
hours of the engine being switched off – indicative of a gas leak.
Parts
The gas tank is conventional and contains a level
transducer and external electronic solenoid lock-off valve.
The gas then flows to the converter / pressure
regulator that changes the LPG from liquid to gas and regulates it at 2.2 Bar
(32 psi). (This pressure is adjustable but is set by the installer and then not
altered further.) The coolant temp sensor for the LPG ECU is placed on the
converter.
From there the gas flows to the filter assembly
that uses a combined sensor for gas temperature and pressure. The gas
temperature can vary with ambient and under-bonnet temp variations, while the
gas pressure (although ostensibly regulated by the converter / regulator) can
also vary, eg dropping with a sudden throttle opening.
The injector block (or blocks – on V engines, two
blocks are used) are mounted close to the intake manifold. Short hoses connect
the injectors to the fittings tapped into the inlet manifold. If these fittings
are by necessity distant from the petrol injectors, plastic hoses are placed
inside the intake runners to allow the gas to exit close to the inlet valves.
The system is calibrated for the car by a laptop
software package. This also allows fault diagnosis and graphing of sensor
outputs.
Stale
Fuel
Since
the LPG system switches over to gas shortly after starting, very little petrol
is used. This can lead to problems with stale fuel – John Parnell suggests that
after 3 months, the fuel’s characteristics will have noticeably changed. He
suggests that every third tank of LPG, the owner should run the car on petrol
for 10 minutes, thus using up the petrol much more rapidly.
|
Power, Fuel Consumption and Emissions
So if aftermarket LPG has progressed to this
extent, is there are any bad news? John Parnell was frank.
“Typically there’s a 3 per cent drop in power,” he
said. “But I don’t know if many of our customers are really concerned by that. I
always tell them that driveability remains exactly the same as on petrol.”
More serious is the rise in fuel consumption. John
Parnell says that typically fuel consumption on LPG rises by 15 – 20 percent.
“That’s more than our competitors will tell you
but it’s what I have seen on the emissions test cycle,” he said.
To be legally able to be fitted, the LPG system
must provide the same or better tail-pipe emissions as the standard car achieves
on petrol. These tests are, in the case of Parnell LP Gas Systems, ‘hot’ tests
done on the IM240 cycle – 240 seconds of a rolling dyno test replicating mostly
urban conditions.
John Parnell provided us with the test results of
a VZ Holden Commodore V6 fitted with the sequential electronic injection LPG
system.
|
Hydrocarbons |
Oxides of Nitrogen |
Carbon Monoxide |
Carbon Dioxide |
|
Petrol |
0.04 |
0.01 |
0.5 |
293 |
|
LPG |
0.03 |
0.01 |
0.3 |
272 |
|
Difference |
-25% |
0 |
-40% |
-7% |
(measurements in grams/kilometre over the IM240
test)
As can be seen, all measured emissions either
decreased or stayed the same. Interestingly, in this case the measured fuel
consumption on gas was actually better than on petrol – 12.5 litres/100 on
petrol and 11.7 litres/100 on gas, a decrease of 6 per cent and (as expected) a
very close mach for the drop in CO2.
Driving
We went for a short drive in a 2005 Camry V6
fitted with the gas injection system.
The transition from LPG to petrol (and vice versa)
was so smooth as to be largely unnoticeable, and the car retained identical
driveability and idle speed control whatever the fuel. The owner of the car (an
employee of Parnell LP Gas Systems) suggested that if gunned off the line, the
car could have a small initial flat spot (perhaps caused by the long
injector-to-manifold gas hoses of this installation) but we noticed absolutely
zero driveability issues.
Conclusion
As always, the economics of a gas conversion
depend on how many kilometres the car will do and the relative cost of LPG and
petrol. With the current Australian government reimbursement of $2000, you’ll be
about $1800 out of pocket to have a full Parnell electronically controlled
vapour gas injection system fitted. Remember to factor-in an increased fuel
usage of 15 – 20 per cent and then do the calculations.
With factory driveability and only a trivial power
loss, we think it’s now purely a matter of economics – the system works
absolutely fine.
Contact: www.parnell.com.au
|